![]() |
A
basic_socket
is always the lowest layer.
typedef basic_socket< Protocol, Executor > lowest_layer_type;
Name |
Description |
---|---|
Rebinds the socket type to another executor. |
|
Socket option to permit sending of broadcast messages. |
|
IO control command to get the amount of data that can be read without blocking. |
|
Socket option to enable socket-level debugging. |
|
Socket option to prevent routing, use local interfaces only. |
|
Socket option to report aborted connections on accept. |
|
The endpoint type. |
|
The type of the executor associated with the object. |
|
Socket option to send keep-alives. |
|
Socket option to specify whether the socket lingers on close if unsent data is present. |
|
A basic_socket is always the lowest layer. |
|
Bitmask type for flags that can be passed to send and receive operations. |
|
The native representation of a socket. |
|
Socket option for putting received out-of-band data inline. |
|
The protocol type. |
|
Socket option for the receive buffer size of a socket. |
|
Socket option for the receive low watermark. |
|
Socket option to allow the socket to be bound to an address that is already in use. |
|
Socket option for the send buffer size of a socket. |
|
Socket option for the send low watermark. |
|
Different ways a socket may be shutdown. |
|
Wait types. |
Name |
Description |
---|---|
Assign an existing native socket to the socket. |
|
Start an asynchronous connect. |
|
Asynchronously wait for the socket to become ready to read, ready to write, or to have pending error conditions. |
|
Determine whether the socket is at the out-of-band data mark. |
|
Determine the number of bytes available for reading. |
|
basic_socket [constructor] |
Construct a basic_socket without opening it. |
Bind the socket to the given local endpoint. |
|
Cancel all asynchronous operations associated with the socket. |
|
Close the socket. |
|
Connect the socket to the specified endpoint. |
|
Get the executor associated with the object. |
|
Get an option from the socket. |
|
Perform an IO control command on the socket. |
|
Determine whether the socket is open. |
|
Get the local endpoint of the socket. |
|
Get a reference to the lowest layer. |
|
Get the native socket representation. |
|
Gets the non-blocking mode of the native socket implementation.
|
|
Gets the non-blocking mode of the socket. |
|
Open the socket using the specified protocol. |
|
Move-assign a basic_socket from another. |
|
Release ownership of the underlying native socket. |
|
Get the remote endpoint of the socket. |
|
Set an option on the socket. |
|
Disable sends or receives on the socket. |
|
Wait for the socket to become ready to read, ready to write, or to have pending error conditions. |
Name |
Description |
---|---|
~basic_socket [destructor] |
Protected destructor to prevent deletion through this type. |
Name |
Description |
---|---|
max_connections [static] |
(Deprecated: Use max_listen_connections.) The maximum length of the queue of pending incoming connections. |
max_listen_connections [static] |
The maximum length of the queue of pending incoming connections. |
message_do_not_route [static] |
Specify that the data should not be subject to routing. |
message_end_of_record [static] |
Specifies that the data marks the end of a record. |
message_out_of_band [static] |
Process out-of-band data. |
message_peek [static] |
Peek at incoming data without removing it from the input queue. |
The basic_socket
class template provides functionality that is common to both stream-oriented
and datagram-oriented sockets.
Distinct objects: Safe.
Shared objects: Unsafe.
Header: asio/basic_socket.hpp
Convenience header: asio.hpp